** ============================================================================ ** ** Sample response file for IBM DB2 ** -------------------------------- ** To select features and settings to install, uncomment the corresponding ** keywords and specify values for those keywords. You do not need to select ** features if you select the TYPICAL or COMPACT installation options. ** ** Comments are made by placing either an asterisk (*) or a hash symbol (#) at ** the start of a line, or by placing ** or ## after the start of a line to ** comment out the rest of that line. ** All keywords that are currently uncommented (not preceded by * or #) are ** mandatory and must be assigned values for the installation to continue. ** All other keywords are optional. If optional keywords are not specified, ** the installation will proceed using default values. Lines that start out ** with two asterisks are documentation and should not be enabled. ** ** For more information on creating or configuring an ESE instance with the ** DB2 pureScale Feature, see "Installing the ** IBM DB2 pureScale feature for DB2 Server Edition ** using a response file" in the DB2 Information Center. ** For more information on configuration parameters, see "Configuring the DB2 database manager with ** configuration parameters" in the DB2 Information Center. ** ** For more information on DB2 registry and environment variables, and configuration ** parameters, see "DB2 registry and environment variables" in the DB2 Information Center. ** ** For more information on how to perform a response file installation, see ** "Response file considerations" in the DB2 Information Center. ** ** Refer to the DB2 Information Center at: ** https://www-01.ibm.com/support/knowledgecenter/SSEPGG_11.5.6/com.ibm.db2.luw.kc.doc/welcome.html ** ** ============================================================================ ** General Options ** --------------- ** Only one product can be specified for the following PROD keyword. Specifying ** multiple products in an installation is not supported. PROD = DB2_SERVER_EDITION ** The FILE keyword determines the base installation path. If you specify a ** path that does not yet have this product, this will install a new copy. If ** you specify a path that has this product, this will be considered an ** existing installation intended to install additional functionality. This is ** a mandatory keyword for root installation. Remove this keyword for non-root ** installation. If not removed, its value must be $HOME/sqllib where $HOME ** represents the HOME directory of the non-root user ID that owns the non-root ** installation. FILE = /home/db2inst1/sqllib ** Modify the value of the following LIC_AGREEMENT keyword to indicate that you ** have read and agreed to the license agreement file in the db2/license ** directory. LIC_AGREEMENT = ACCEPT ** ACCEPT or DECLINE ** If an interactive type is set, db2setup will prompt for CD locations and ** give feedback as to progress, otherwise nothing will be displayed until the ** installation is complete. *INTERACTIVE = NONE ** NONE, YES, MACHINE ** The CONFIG_ONLY keyword is used to specify that the response file is being ** used for creating or configuring an instance, and nothing is to be ** installed. This keyword must be set to YES if a response file is used with ** db2isetup. *CONFIG_ONLY = ** YES or NO ** INSTALL_TYPE keyword is used to select the installation type. If you specify ** a TYPICAL or a COMPACT install type, no COMP keywords are required. In this ** case the installer will select the appropriate components for you. All COMP ** keywords are ignored by the installer unless the INSTALL_TYPE is set to ** CUSTOM. If you select the CUSTOM install type, then ensure that you enable ** all of the COMP keywords that are required for your database environment. ** ** Note: The install type is not related to the language selection. ** ---------------------------------------------------------------------------- INSTALL_TYPE = COMPACT ** TYPICAL, COMPACT, CUSTOM ** The following components are part of all TYPICAL installations. If you ** perform a typical installation, all of these components will be installed on ** your computer. ** ---------------------------------------------------------------------------- ** DB2 Advanced Copy Services help protect mission-critical data that requires ** 24x7 availability. It offers an integrated solution designed to implement ** high-efficiency backup and restore processes and helps eliminate ** backup-related performance issues. *COMP = ACS ** Integrated Flash Copy Support ** Provides federated support required to access DB2 for iSeries and DB2 for ** z/OS and OS/390 data sources. *COMP = DB2_DATA_SOURCE_SUPPORT ** DB2 data source support ** Sample database source provides sample data and metadata that allows you to ** create a sample database using the First Steps application. *COMP = DB2_SAMPLE_DATABASE ** Sample database source ** Enables users and applications with Federated Data Source Access *COMP = FED_DATA_SOURCE_SUPPORT ** Federated Data Access Support ** First Steps is a graphical tool that will help familiarize you with DB2 ** features and functions. *COMP = FIRST_STEPS ** First Steps ** Guardium Installation Manager Client component will place the Guardium ** Installation Manager(GIM) Client under DB2 Install Path. *COMP = GUARDIUM_INST_MNGR_CLIENT ** Guardium Installation Manager Client ** The DB2 Instance Setup wizard is a Java-based tool you can use to set up ** instances on your computer after installing DB2. *COMP = INSTANCE_SETUP_SUPPORT ** DB2 Instance Setup wizard ** LDAP Exploitation allows DB2 to use an LDAP directory to store database ** directory and configuration information. *COMP = LDAP_EXPLOITATION ** DB2 LDAP support ** (PCMK keyword for installation of Pacemaker using response file is not yet ** supported) Pacemaker is an open-source, high availability cluster manager ** software integrated on Linuxamd64 and Linux390x64. *COMP = PCMK ** Pacemaker ** IBM Tivoli System Automation for Multiplatforms provides high availability ** and disaster recovery capabilities for AIX, Linux, Solaris SPARC, and ** Windows. ** If this component is selected, it will either be installed, updated or ** upgraded by the DB2 installer. Use COMP=TSAMP only if you are running as ** root user. *COMP = TSAMP ** Tivoli SA MP ** The following components are not part of TYPICAL installations, and thus can ** only be installed through CUSTOM installs. ** ---------------------------------------------------------------------------- ** The base application development tools component contains tools and files ** (including header files, libraries, and a precompiler) that are needed for ** developing applications that work with DB2. *COMP = APPLICATION_DEVELOPMENT_TOOLS ** Base application development tools ** A scalable, highly-available, high performance file system optimized for ** multi-petabyte storage management. ** If this component is selected, it will either be installed, updated or ** upgraded by the DB2 installer. Use COMP=GPFS only if you are running as ** root user. *COMP = GPFS ** General Parallel File System (GPFS) ** Application data sources use an application to access the underlying ** nonrelational data. The raw data can be in a number of standard and ** nonstandard formats. *COMP = IINR_APPLICATIONS_WRAPPER ** Application data sources ** Scientific data sources are developed exclusively for the life sciences ** industry, such as those containing genomic, proteomic, bioinformatic, and ** cheminformatic information. *COMP = IINR_SCIENTIFIC_WRAPPER ** Scientific Data Sources ** Structured file data sources contain nonrelational data stored in files with ** a defined, repeatable structure. *COMP = IINR_STRUCTURED_FILES_WRAPPER ** Structured file data sources ** Enables users and applications to submit distributed requests for data ** managed by Informix systems. ** This feature is only installed and not configured when the PURESCALE feature ** is selected for installation. *COMP = INFORMIX_DATA_SOURCE_SUPPORT ** Informix data source support ** Enables users and applications to submit distributed requests through JDBC ** for data managed by DBMS. *COMP = JDBC_DATA_SOURCE_SUPPORT ** JDBC data source support ** Enables users and applications to submit distributed requests for data ** stored in any data source that supports ODBC and X/Open CLI compliant ** drivers. *COMP = ODBC_DATA_SOURCE_SUPPORT ** ODBC data source support ** Enables users and applications to submit distributed requests for data ** managed by Oracle systems. *COMP = ORACLE_DATA_SOURCE_SUPPORT ** Oracle data source support ** The IBM DB2 pureScale Feature provides clustering technology to DB2 products ** on distributed platforms. ** Selecting the PURESCALE feature will automatically install every other ** required component. See the DB2 Information Center for more information on ** the pre-installation planning and prerequisites needed for a successful IBM ** DB2 pureScale installation and instance setup. Use COMP=PURESCALE only if ** you are running as root user. *COMP = PURESCALE ** IBM DB2 pureScale Feature ** Spatial Extender client contains the support required for communicating with ** a Spatial Extender server. *COMP = SPATIAL_EXTENDER_CLIENT_SUPPORT ** Spatial Extender client ** Provides Spatial Extender support for the DB2 server, providing the storing ** and query of geographical information in DB2 tables. *COMP = SPATIAL_EXTENDER_SERVER_SUPPORT ** Spatial Extender server support ** Enables users and applications to submit distributed requests for data ** managed by Microsoft SQL Server systems. *COMP = SQL_SERVER_DATA_SOURCE_SUPPORT ** SQL Server data source support ** Enables users and applications to submit distributed requests for data ** managed by Sybase systems. *COMP = SYBASE_DATA_SOURCE_SUPPORT ** Sybase data source support ** Enables users and applications to submit distributed requests for data ** managed by Teradata systems. *COMP = TERADATA_DATA_SOURCE_SUPPORT ** Teradata data source support ** The DB2 Text Search component, powered by OmniFind, delivers an integrated, ** high quality and scalable search technology in DB2 databases. ** This feature is only installed and not configured when the PURESCALE feature ** is selected for installation. *COMP = TEXT_SEARCH ** DB2 Text Search ** The following languages apply to all translated components. Enable the ** language(s) you want installed. If you do not enable any language keywords, ** then the English language (EN) will still be installed by default. ** --------------------------------------------------------------------------- *LANG = BR ** Portuguese - Brazil (pt_BR) *LANG = CN ** Simplified Chinese (zh_CN) *LANG = CZ ** Czech (cs_CZ) *LANG = DE ** German (de_DE) *LANG = ES ** Spanish (es_ES) *LANG = FR ** French (fr_FR) *LANG = IT ** Italian (it_IT) *LANG = JP ** Japanese (ja_JP) *LANG = KR ** Korean (ko_KR) *LANG = PL ** Polish (pl_PL) *LANG = RU ** Russian (ru_RU) *LANG = TW ** Traditional Chinese (zh_TW) ** (Valid for non-root upgrade only) Upgrade Older Release ** ------------------------------------------------------- ** Specify whether you want to upgrade any previous versions of the product. ** Specifying this keyword will remove any previous version and upgrade any ** settings to the new installation. Be aware that during upgrade of the ** current copy, only the product specified in the response file will be ** installed. Other previously installed products need to be upgraded ** separately following this upgrade. *UPGRADE_PRIOR_VERSIONS = FALSE ** TRUE or FALSE ** IBM DB2 pureScale Feature Host Information ** ------------------------------------------ ** Specify the hosts to which the DB2 product is to be installed. This section ** must always list the installation initiating host. Do no specify any ** keywords in this section if you are not installing the IBM DB2 pureScale ** Feature. Ensure that password-less ssh root access is available on all hosts ** and between all hosts. ** The HOST keyword is used to specify a host identifier for one set of host ** keys. This keyword is mandatory if you are installing the IBM DB2 pureScale ** Feature. *HOST = host1 ** char(14) no spaces ** Use the HOSTNAME keyword with the host identifier prefix to identify the ** name of the host. A host can be a physical machine or LPAR, on which a DB2 ** member or a cluster caching facility will run. If an alias or IP address is ** provided, the installer will attempt to convert it to a canonical hostname ** prior to instance creation. The host name must be a unique host name across ** the network. The following formats are accepted: long name (for example, ** host1.ibm.com), short name (for example, host1), IP address (IPv4: ** xxx.xxx.xxx.xxx). This keyword is mandatory if you have specified the HOST ** keyword. *host1.HOSTNAME = ** char(255) no spaces ** The CLUSTER_INTERCONNECT_NETNAME keyword is used to specify the name of a ** high speed interconnect name that corresponds to a high speed adapter name. ** Refer to the DB2 Information Center for valid types of high speed adapters. ** This keyword is mandatory if you have specified the HOST keyword. *host1.CLUSTER_INTERCONNECT_NETNAME = ** char(255) no spaces *HOST = host2 ** char(14) no spaces *host2.HOSTNAME = ** char(255) no spaces *host2.CLUSTER_INTERCONNECT_NETNAME = ** char(255) no spaces ** Instance Creation Settings ** -------------------------- ** User IDs managed by NIS/NIS+ are not supported. If an existing user ID is ** used, make sure it is not locked and its password has not expired. ** Prefix name of one instance set. To create or update an instance, one set of ** instance keywords must be specified. The instance set is comprised of the ** identifying prefix value for the INSTANCE key followed by the keys that are ** prefixed by the specified INSTANCE prefix value. If you are creating a DSF ** instance you can only specify one instance at a time in this response file. ** Note: DSF is the instance type for a IBM DB2 pureScale instance. If you are ** not creating a DSF instance, then multiple instances can be specified for ** creation or update in this response file. INSTANCE = DB2_INST ** char(8) no spaces ** Real name of the instance, and also the user ID of instance owner. It can be ** different from the value of the INSTANCE keyword. If an existing ID is ** specified for the instance's NAME keyword, make sure the user ID exists on ** all the participating hosts with the same UID, GID, corresponding group ** name, user name and user home directory. Ensure that existing user IDs are ** not locked and that the password has not expired. IBM DB2 pureScale Feature ** users must specify a name that is unique across the IBM DB2 pureScale ** implementation. DB2_INST.NAME = db2inst1 ** char(8) no spaces, no upper case letters ** The UID will be generated if the keyword is not specified - highly ** recommended. *DB2_INST.UID = ** Unsigned integer DB2_INST.GROUP_NAME = db2iadm1 ** char(30) no spaces ** Use a generated GID if no value provided - highly recommended. *DB2_INST.GID = ** Unsigned integer *DB2_INST.HOME_DIRECTORY = /home/db2inst1 ** char(64) no spaces. Valid for root installation only *DB2_INST.PASSWORD = db2inst1-pwd ** If PURESCALE is selected or installed, the default instance type will be ** DSF. *DB2_INST.TYPE = ESE ** DSF ESE WSE STANDALONE CLIENT ** Set the instance to be auto-started after system reboot. The AUTOSTART ** keyword can only be used by a root installation and only a non-pureScale ** instance type. This keyword is invalid for non-root installation. This ** keyword cannot be used for DSF instance type. DB2_INST.AUTOSTART = YES ** YES or NO ** The START_DURING_INSTALL keyword will start the instance during the ** installation. If this keyword is not specified, the behavior follows the ** AUTOSTART keyword above. DB2_INST.START_DURING_INSTALL = YES ** YES or NO. Default is YES. *DB2_INST.SVCENAME = db2c_db2inst1 ** BLANK or char(14). Reserved for root installation only *DB2_INST.PORT_NUMBER = 25000 ** 1024 - 65535, Reserved for root installation only ** The ports in range [FCM_PORT_NUMBER, FCM_PORT_NUMBER+MAX_LOGICAL_NODES] are ** reserved during the installation. Valid for root installation only. If your ** instance type is DSF, the ports in range [FCM_PORT_NUMBER, ** FCM_PORTNUMBER+MAX_LOGICAL_NODES+3] is reserved. The ports have to be ** continuous and identical on all the participating hosts. *DB2_INST.FCM_PORT_NUMBER = 20000 ** 1024 - 65535, the beginning port number. *DB2_INST.MAX_LOGICAL_NODES = ** 1 - 128 for DSF instances or 1 - 199 for ESE instances. It is a maximum number of logical members to be used on one member host. Valid for root installation only. ** The DB2CF_PORT_NUMBER and the DB2CF_MGMT_PORT_NUMBER are to be reserved for ** the cluster caching facility (CF). As the CF is an instance designation, the ** port names will be pre-defined based on the name of the instance. Example: ** Where the instance name is db2sdin1, the names required for the CF ports ** will be DB2CF_db2inst1 and DB2CF_db2inst1_MGMT. Ensure that all the port ** names are the same on all the participating hosts. The two CF ports must be ** available on all the participating hosts. If you want the installer to ** generate these values, leave them commented out. *DB2_INST.DB2CF_PORT_NUMBER = 56001 ** 1024 - 65535. *DB2_INST.DB2CF_MGMT_PORT_NUMBER = 56000 ** 1024 - 65535. ** The PREFERRED_PRIMARY_CF is used to specify the preferred primary cluster ** caching facility needed to create a new IBM DB2 pureScale instance. This ** keyword is mandatory if you are creating a new IBM DB2 pureScale instance. ** The value provided must match the value of any HOST keyword specified in ** this response file. If you are extending an instance, this keyword should be ** commented out. *DB2_INST.PREFERRED_PRIMARY_CF = ** a host identifier, char(14) ** The PREFERRED_SECONDARY_CF is used to specify the preferred secondary ** cluster caching facility for the IBM DB2 pureScale instance. The value ** provided must match the value of any HOST keyword specified in this response ** file. This host identifier should be specified in any HOST section. *DB2_INST.PREFERRED_SECONDARY_CF = ** a host identifier, char(14) ** The MEMBER keyword is required if you are creating a new IBM DB2 pureScale ** instance. The value provided must match the value of any HOST keyword ** specified in this response file. Specify more MEMBER keywords so that each ** new host is defined in this response file as either a DB2 member or a ** cluster caching facility (CF host, see above). *DB2_INST.MEMBER = ** a host identifier, char(14) *DB2_INST.CLIENT_IMPORT_PROFILE = ** a full path or a file in the same directory as the response file ** Do not set FEDERATED if you are creating or configuring a DSF instance. *DB2_INST.FEDERATED = ** YES or NO ** Do not set INFORMIX_CLIENT_HOME if you are creating or configuring a DSF ** instance. *DB2_INST.INFORMIX_CLIENT_HOME = BLANK ** BLANK, char(1023) ** Do not set INFORMIX_SERVER_HOME if you are creating or configuring a DSF ** instance. *DB2_INST.INFORMIX_SERVER_HOME = BLANK ** BLANK, char(1023) *DB2_INST.ORACLE_HOME = ** any valid path , char(64) no spaces *DB2_INST.SYBASE_HOME = ** any valid path, char(1023) *DB2_INST.SYBASE_OCS = ** valid SYBASE_OCS directory name, char(1023) *DB2_INST.SQLSERVER_ODBC_LIB_PATH = ** the full path name where libodbc file is in, char(1023) *DB2_INST.SQLSERVER_ODBC_INI_PATH = ** the full path name of .odbc.ini file including the file name, char(1023) *DB2_INST.TERADATA_CLI_PATH = ** the full path name to libcliv2.so library *DB2_INST.TERADATA_ERRMSG_PATH = ** the full path name to errmsg.txt error message file *DB2_INST.AUTHENTICATION = SERVER ** CLIENT, SERVER, or SERVER_ENCRYPT ** An existing user ID should be specified for DB2SSHID_USERNAME keyword, make ** sure the user ID exists on all the participating hosts with the same UID, ** GID, corresponding group name, user name and user home directory. Ensure ** that existing user IDs are not locked and that the password has not expired. ** IBM DB2 pureScale Feature users must specify a name that is unique across ** the IBM DB2 pureScale implementation. *DB2_INST.DB2SSHID_USERNAME = ** char(8) no spaces, no upper case letters ** Tivoli SA MP Tiebreaker Settings (IBM DB2 pureScale Feature only) ** ----------------------------------------------------------------- ** The DB2_CLUSTER_SERVICES_TIEBREAKER_DEVICE_PATH keyword is used to specify ** the device path for Tivoli SA MP Tiebreaker setup. The keyword is mandatory ** when setting up the first IBM DB2 pureScale instance. ** All the hosts specified in HOST section must have direct access to this ** disk. *DB2_CLUSTER_SERVICES_TIEBREAKER_DEVICE_PATH = ** a valid device path, for example, /dev/sda ** Shared File System Settings (IBM DB2 pureScale Feature only) ** ------------------------------------------------------------ ** Only one of the following two keywords is needed when setting up the first ** IBM DB2 pureScale instance on the host; If both INSTANCE_SHARED_DEVICE_PATH ** and INSTANCE_SHARED_DIR are specified, INSTANCE_SHARED_DIR will be ignored. ** If the task is to extend an instance to a new host, both of these keywords ** will be ignored. ** Specify INSTANCE_SHARED_DEVICE_PATH to create a DB2 cluster file system. All ** the hosts specified in the HOST sections should have direct access to the ** shared device path specified. *INSTANCE_SHARED_DEVICE_PATH = ** a valid device path, for example, /dev/sda ** Specify the INSTANCE_SHARED_MOUNT to define the mounting point of the new ** DB2 cluster file system. It is optional and valid only if ** INSTANCE_SHARED_DEVICE_PATH is specified. ** INSTANCE_SHARED_DEVICE_PATH is specified. *INSTANCE_SHARED_MOUNT = ** a valid mount point of the new DB2 cluster file system. ** Specify the INSTANCE_SHARED_DIR to use a user-managed shared file system for ** instance creation. *INSTANCE_SHARED_DIR = ** a valid mount point of shared file system. ** Fenced User Creation Settings ** ----------------------------- ** Valid for root installation only. User IDs managed by NIS/NIS+ are not ** supported. If an existing ID is used, make sure it is not locked and its ** password has not expired. ** Make sure the user name specified for FENCED_USERNAME is not locked and its ** password has not expired. *DB2_INST.FENCED_USERNAME = db2sdfe1 ** char(8) no spaces, no upper case letters ** If no value is provided for FENCED_UID keyword, the DB2 installer will ** generate one for you. This is highly recommended. *DB2_INST.FENCED_UID = ** Unsigned integer *DB2_INST.FENCED_GROUP_NAME = db2fsdm1 ** char(30) no spaces ** If no value is provided for FENCED_GID keyword, the DB2 installer will ** generate one for you. This is highly recommended. *DB2_INST.FENCED_GID = ** Unsigned integer *DB2_INST.FENCED_HOME_DIRECTORY = ** char(64) no spaces ** This FENCED_PASSWORD is required if the fenced user ID is a new user *DB2_INST.FENCED_PASSWORD = ** char(8) ** Text Search Configuration ** ------------------------- ** Do not set CONFIGURE_TEXT_SEARCH if you are creating or configuring a DSF ** instance. *DB2_INST.CONFIGURE_TEXT_SEARCH = NO ** YES or NO ** Do not set TEXT_SEARCH_HTTP_SERVICE_NAME if you are creating or configuring ** a DSF instance. *DB2_INST.TEXT_SEARCH_HTTP_SERVICE_NAME = db2j_db2inst1 ** BLANK or char(14). Valid for root installation only ** Do not set TEXT_SEARCH_HTTP_PORT_NUMBER if you are creating or configuring a ** DSF instance. *DB2_INST.TEXT_SEARCH_HTTP_PORT_NUMBER = 55000 ** Any unused port number from 1024 - 65535 ** Instance DBM CFG Settings ** ------------------------- *DB2_INST.CF_DIAGLEVEL = 2 ** a number in range [0 - 4] *DB2_INST.CF_DIAGPATH = ** BLANK or char(215) *DB2_INST.CF_MEM_SZ = AUTOMATIC ** AUTOMATIC or a number in range [32768 - 4 294 967 295] *DB2_INST.CF_NUM_CONNS = AUTOMATIC ** AUTOMATIC or a number in range [4-256] *DB2_INST.CF_NUM_WORKERS = AUTOMATIC ** AUTOMATIC or a number in range [1 - 31] *DB2_INST.RSTRT_LIGHT_MEM = AUTOMATIC ** 1-10 for AUTOMATIC or a number in range [1 - 50] *DB2_INST.AGENTPRI = ** SYSTEM, -1 or 41-128 *DB2_INST.ASLHEAPSZ = ** 1 - 524288 *DB2_INST.AUDIT_BUF_SZ = ** 0 - 65000 *DB2_INST.CATALOG_NOAUTH = ** 0, 1, YES or NO *DB2_INST.CLUSTER_MGR = ** TSA, VENDOR: *DB2_INST.COMM_BANDWIDTH = ** -1 or 0.1 - 100000.0 *DB2_INST.CONN_ELAPSE = ** 0 - 100 *DB2_INST.CPUSPEED = ** -1 or 1e-10 - 1 *DB2_INST.DFTDBPATH = ** any valid path *DB2_INST.DFT_ACCOUNT_STR = ** BLANK or char(25) *DB2_INST.DFT_MON_BUFPOOL = ** ON or OFF *DB2_INST.DFT_MON_LOCK = ** ON or OFF *DB2_INST.DFT_MON_SORT = ** ON or OFF *DB2_INST.DFT_MON_STMT = ** ON or OFF *DB2_INST.DFT_MON_TABLE = ** ON or OFF *DB2_INST.DFT_MON_UOW = ** ON or OFF *DB2_INST.DFT_MON_TIMESTAMP = ** ON or OFF *DB2_INST.DIAGLEVEL = ** 0 - 4 *DB2_INST.DIAGPATH = ** BLANK or char(215) *DB2_INST.DIAGSIZE = ** A value specified in MB and limited by the available disk space in DIAGPATH. Minimum 2 MB must be specified. *DB2_INST.FENCED_POOL = -1 or AUTOMATIC ** -1(MAX_COORDAGENTS), AUTOMATIC or a number in range [0, 64000] *DB2_INST.INSTANCE_MEMORY = AUTOMATIC ** AUTOMATIC or a number in range [0, 1000000] for 32-bit and [0, 68719476736] for 64-bit *DB2_INST.HEALTH_MON = ** default is ON; ON or OFF *DB2_INST.MAX_CONNECTIONS = -1 or AUTOMATIC ** -1, AUTOMATIC or [1, 64000] *DB2_INST.FED_NOAUTH = NO ** YES or NO, default is NO *DB2_INST.DIR_CACHE = ** YES or NO *DB2_INST.DISCOVER = ** DISABLE, KNOWN or SEARCH *DB2_INST.DISCOVER_COMM = ** BLANK or TCPIP *DB2_INST.DISCOVER_INST = ** ENABLE or DISABLE *DB2_INST.FCM_NUM_ANCHORS = ** -1 or 128 - FCM_NUM_RQB *DB2_INST.FCM_NUM_BUFFERS = ** 128 - 65300 *DB2_INST.FCM_NUM_CONNECT = ** -1 or 128 - FCM_NUM_RQB *DB2_INST.FCM_NUM_RQB = ** 128 - 120000 *DB2_INST.INDEXREC = ** ACCESS or RESTART *DB2_INST.INTRA_PARALLEL = NO ** SYSTEM, YES or NO *DB2_INST.JAVA_HEAP_SZ = ** 0 - 4096 *DB2_INST.JDK_PATH = ** BLANK or char(255) *DB2_INST.SSL_SVR_KEYDB = ** BLANK or char(1023) *DB2_INST.SSL_SVR_STASH = ** BLANK or char(1023) *DB2_INST.SSL_SVR_LABEL = ** BLANK or char(1023) *DB2_INST.SSL_SVCENAME = ** BLANK or char(14) *DB2_INST.SSL_CIPHERSPECS = ** BLANK or char(255) *DB2_INST.SSL_VERSIONS = ** BLANK or char(255) *DB2_INST.SSL_CLNT_KEYDB = ** BLANK or char(1023) *DB2_INST.SSL_CLNT_STASH = ** BLANK or char(1023) *DB2_INST.ALTERNATE_AUTH_ENC = ** NOT_SPECIFIED, AES_ONLY, AES_CMP *DB2_INST.KEEPDARI = ** YES or NO *DB2_INST.MAXAGENTS = ** 1 - 64000 *DB2_INST.MAXCAGENTS = ** -1 or 1 - MAX_COORDAGENTS *DB2_INST.MAXDARI = ** -1 or 1 - MAX_COORDAGENTS *DB2_INST.MAXTOTFILOP = ** 100 - 32768 *DB2_INST.MAX_CONNRETRIES = ** 0 - 100 *DB2_INST.MAX_COORDAGENTS = 200 or AUTOMATIC ** 200, AUTOMATIC, -1 or 0 - 64000, -1 translates into a value of 200 *DB2_INST.MAX_TIME_DIFF = 300 ** 1-1440. The unit of measurement is second *DB2_INST.MAX_QUERYDEGREE = ** ANY, -1 or 1 - 32767 *DB2_INST.MON_HEAP_SZ = AUTOMATIC ** AUTOMATIC or 0 - 60000 *DB2_INST.NUMDB = ** 1 - 256 *DB2_INST.NUM_INITAGENTS = 0 ** 0 - 64000 *DB2_INST.NUM_INITDARIS = ** 0 - MAXDARI *DB2_INST.NUM_INITFENCED = 0 ** 0 - 64000 *DB2_INST.NUM_POOLAGENTS = 100 or AUTOMATIC ** -1, AUTOMATIC or 0 - 64000 *DB2_INST.QUERY_HEAP_SZ = ** 2 - 524288 *DB2_INST.RESTBUFSZ = ** 16 - 524288 *DB2_INST.RESYNC_INTERVAL = ** 1 - 60000 *DB2_INST.ROUTE_OBJ_NAME = ** BLANK or char(255) *DB2_INST.RQRIOBLK = ** 4096 - 65535 *DB2_INST.SHEAPTHRES = ** 250 - 2097152 *DB2_INST.SPM_LOG_FILE_SZ = ** 4 - 1000 *DB2_INST.SPM_LOG_PATH = ** BLANK or char(226) *DB2_INST.SPM_MAX_RESYNC = ** 10 - 256 *DB2_INST.SPM_NAME = ** BLANK or char(8) *DB2_INST.START_STOP_TIME = ** 1 - 1440 *DB2_INST.SYSADM_GROUP = ** BLANK or char(30) *DB2_INST.SYSCTRL_GROUP = ** BLANK or char(30) *DB2_INST.SYSMAINT_GROUP = ** BLANK or char(30) *DB2_INST.TP_MON_NAME = ** BLANK or char(19) *DB2_INST.TRUST_ALLCLNTS = ** YES, NO or DRDAONLY *DB2_INST.TRUST_CLNTAUTH = ** CLIENT or SERVER *DB2_INST.UDF_MEM_SZ = ** 128 - 60000 *DB2_INST.FCM_NUM_CHANNELS = ** 128, 524288 *DB2_INST.FEDERATED_ASYNC = 0 ** ANY or 0 - 32767 ** Instance Profile Registry Settings ** ---------------------------------- *DB2_INST.DB2ACCOUNT = ** BLANK or char(199) *DB2_INST.DB2ATLD_PORTS = ** BLANK or 1-65535:1-65535 n1<=n2 *DB2_INST.DB2BIDI = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2_INST.DB2BQTIME = ** BLANK or 1 - MAX *DB2_INST.DB2BQTRY = ** BLANK or 0 - MAX *DB2_INST.DB2CHKPTR = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2_INST.DB2CLIINIPATH = ** BLANK or char(260) *DB2_INST.DB2CODEPAGE = ** BLANK or 0 - MAX *DB2_INST.DB2CONNECT_IN_APP_PROCESS = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2_INST.DB2COUNTRY = ** BLANK or 1 - 999 *DB2_INST.DB2DBDFT = ** BLANK or char(8) *DB2_INST.DB2DEFPREP = ** BLANK, ALL, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2_INST.DB2ENVLIST = ** BLANK or char() *DB2_INST.DB2INCLUDE = ** BLANK or char() *DB2_INST.DB2IQTIME = ** BLANK or 1 - MAX *DB2_INST.DB2LIBPATH = ** BLANK or char() *DB2_INST.DB2LOADREC = ** BLANK or char(260) *DB2_INST.DB2LOCK_TO_RB = ** BLANK or STATEMENT *DB2_INST.DB2NOEXITLIST = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2_INST.DB2OLDEVMON = ** BLANK or char() *DB2_INST.DB2OPTIONS = ** BLANK or -/+[a,c,e[c,s],n,o,p,s,t,v,w,x] and/or -[f,l,r,z]filename *DB2_INST.DB2_OPTSTATS_LOG = ** OFF or ON with parameters {NUM | SIZE | NAME | DIR} *DB2_INST.DB2PRIORITIES = ** BLANK or char() *DB2_INST.DB2RQTIME = ** BLANK or 1 - MAX *DB2_INST.DB2_SET_MAX_CONTAINER_SIZE = ** -1 (no limit) or any integer greater than 64MB *DB2_INST.DB2SORT = ** BLANK or char(260) *DB2_INST.DB2_SYSTEM_MONITOR_SETTINGS = ** Controls parameters OLD_CPU_USAGE and DISABLE_CPU_USAGE with ON or OFF values *DB2_INST.DB2_AVOID_PREFETCH = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2_INST.DB2_CORRELATED_PREDICATES = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2_INST.DB2_FORCE_NLS_CACHE = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2_INST.DB2_HASH_JOIN = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2_INST.DB2_INDEX_FREE = ** BLANK or 0 - 60 *DB2_INST.DB2_LIKE_VARCHAR = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T, F or 0.0 - 5.0 (exclusive) *DB2_INST.DB2_LOADSORT_STACKSZ = ** BLANK or 1 - MAX *DB2_INST.DB2_NO_PKG_LOCK = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2_INST.DB2_NUM_FAILOVER_NODES = ** BLANK or 0 - 999 *DB2_INST.DB2_PARALLEL_IO = ** BLANK, * or 0-4095,0-4095,... *DB2_INST.DB2_PRED_FACTORIZE = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2_INST.DB2_SORT_AFTER_TQ = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2_INST.DB2_STRIPED_CONTAINERS = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2_INST.DB2INSTOWNER = ** BLANK or char(30) *DB2_INST.DB2DBMSADDR = ** BLANK or char(10) *DB2_INST.DB2_DISABLE_FLUSH_LOG = ** BLANK or ON, OFF *DB2_INST.DB2LOCALE = ** BLANK or YES, NO *DB2_INST.DB2NODE = ** BLANK or YES NO *DB2_INST.DB2_USE_PAGE_CONTAINER_TAG = ** BLANK or ON *DB2_INST.DB2TCPCONNMGRS = ** BLANK or 1 - 8 *DB2_INST.DB2_PARTITIONEDLOAD_DEFAULT = ** BLANK or YES, NO *DB2_INST.DB2_INLIST_TO_NLJN = ** BLANK or YES, NO *DB2_INST.DB2_SELECTIVITY = ** BLANK or YES, NO *DB2_INST.DB2_REDUCED_OPTIMIZATION = ** BLANK, DISABLE, YES, NO, 0 - MAX *DB2_INST.DB2_BINSORT = ** BLANK or YES, NO *DB2_INST.DB2BPVARS = ** BLANK or char() *DB2_INST.DB2_ENABLE_BUFPD = ** BLANK or ON, OFF *DB2_INST.DB2_EVMON_EVENT_LIST_SIZE = 0 ** A value specified in KB, MB or GB and limited by the available memory from the monitor heap *DB2_INST.DB2_EXTENDED_OPTIMIZATION = ** BLANK or ON, OFF *DB2_INST.DB2FODC = Concatenation of all FODC parameters: CORELIMIT, DUMPCORE, DUMDIR, MEMSCAN and SERVICELEVEL ** CORELIMIT, DUMPCORE, DUMPDIR and MEMSCAN parameters are set different for Unix and Windows *DB2_INST.DB2MAXFSCRSEARCH = ** BLANK or -1, 1 - 33554 *DB2_INST.DB2MEMDISCLAIM = ** BLANK or YES, NO *DB2_INST.DB2_VENDOR_INI = ** BLANK or char() *DB2_INST.DB2_XBSA_LIBRARY = ** BLANK or char() *DB2_INST.DB2LDAP_SEARCH_SCOPE = ** BLANK LOCAL DOMAIN GLOBAL *DB2_INST.DB2MEMMAXFREE = ** BLANK or char() *DB2_INST.DB2NTMEMSIZE = ** BLANK or char() *DB2_INST.DB2_OVERRIDE_BPF = ** BLANK or 1 - MAX *DB2_INST.DB2_DJ_COMM = ** BLANK or char() *DB2_INST.DB2ADMINSERVER = ** BLANK or char(64) *DB2_INST.DB2_PINNED_BP = NO ** YES or NO *DB2_INST.DB2REMOTEPREG = ** BLANK or char(64) *DB2_INST.DB2_ANTIJOIN = ** BLANK or YES, NO, EXTEND *DB2_INST.DB2_COLLECT_TS_REC_INFO = ** BLANK or YES, NO *DB2_INST.DB2PROCESSORS = ** BLANK or 1 - MAX *DB2_INST.DB2ASSUMEUPDATE = ** BLANK or ON, OFF *DB2_INST.DB2_SKIPDELETED = ** BLANK or ON, OFF *DB2_INST.DB2_SQLROUTINE_PREPOPTS = ** BLANK or char() *DB2_INST.DB2_INDEX_TYPE2 = ** BLANK or ON, OFF *DB2_INST.DB2_APM_PERFORMANCE = ** BLANK or ON, OFF *DB2_INST.DB2_FMP_COMM_HEAPSZ = ** BLANK or 1 - MAX *DB2_INST.DB2_EVALUNCOMMITTED = ** BLANK or YES, NO *DB2_INST.DB2_NO_FORK_CHECK = ** BLANK or ON, OFF *DB2_INST.DB2_KEEPTABLELOCK = ** BLANK or ON, OFF *DB2_INST.DB2GRAPHICUNICODESERVER = ** BLANK or ON, OFF *DB2_INST.DB2_MINIMIZE_LISTPREFETCH = ** BLANK or YES, NO *DB2_INST.DB2_TRUSTED_BINDIN = ** BLANK or ON, OFF, CHECK *DB2_INST.DB2_CLPPROMPT = ** BLANK or char(99) *DB2_INST.DB2_FORCE_APP_ON_MAX_LOG = ** BLANK or TRUE, FALSE *DB2_INST.DB2_CLP_EDITOR = ** BLANK or char() *DB2_INST.DB2_CLP_HISTSIZE = ** BLANK or 1 - 500 *DB2_INST.DB2_LOAD_COPY_NO_OVERRIDE = ** BLANK or LOCAL, DOMAIN, GLOBAL *DB2_INST.DB2_MAX_NON_TABLE_LOCKS = ** BLANK or 1 - MAX *DB2_INST.DB2_USE_ALTERNATE_PAGE_CLEANING = ** BLANK or ON, OFF *DB2_INST.DB2_SCATTERED_IO = ** BLANK or ON, OFF *DB2_INST.DB2_NO_MPFA_FOR_NEW_DB = ** BLANK or YES, NO *DB2_INST.DB2_OBJECT_TABLE_ENTRIES = ** BLANK or 0 - 50000 *DB2_INST.DB2_VIEW_REOPT_VALUES = ** BLANK or YES, NO *DB2_INST.DB2_SELUDI_COMM_BUFFER = ** BLANK or ON, OFF *DB2_INST.DB2_ENABLE_AUTOCONFIG_DEFAULT = ** BLANK, YES, NO *DB2_INST.DB2_OPT_MAX_TEMP_SIZE = ** BLANK or 0 - MAX *DB2_INST.DB2RCMD_LEGACY_MODE = ** YES, ON, TRUE, 1 or NO, OFF, FALSE, 0 *DB2_INST.DB2_LARGE_PAGE_MEM = ** *, DB *DB2_INST.DB2_MAX_LOB_BLOCK_SIZE = 0 ** 0 - 21487483647 *DB2_INST.DB2RSHCMD = rsh ** Values are a full path name to rsh, or ssh *DB2_INST.DB2AUTH = ** BLANK or char() *DB2_INST.DB2CONNECT_DISCONNECT_ON_INTERRUPT = NO ** YES, TRUE, 1 or NO, FALSE, 0 *DB2_INST.DB2CONNECT_ENABLE_EURO_CODEPAGE = ** BLANK or char() *DB2_INST.DB2FCMCOMM = TCPIP4 ** TCPIP4 or TCPIP6 *DB2_INST.DB2FFDC = ** BLANK, ON, CORE:OFF *DB2_INST.DB2LOADFLAGS = ** BLANK or char() *DB2_INST.DB2RSHTIMEOUT = 30 ** 1 - 120 *DB2_INST.DB2TCP_CLIENT_CONTIMEOUT = 0 ** 0 - 32767 *DB2_INST.DB2TCP_CLIENT_RCVTIMEOUT = 0 ** 0 - 32767 *DB2_INST.DB2TRC_DEF_BUFFSIZE = ** BLANK or char() *DB2_INST.DB2YIELD = ** BLANK or char() *DB2_INST.DB2_ASYNC_IO_MAXFILOP = MAXFILOP ** MAXFILOP - MAX *DB2_INST.DB2_BAR_AUTONOMIC_DISABLE = ** BLANK or char() *DB2_INST.DB2_CONNRETRIES_INTERVAL = ** BLANK or char() *DB2_INST.DB2_DXX_PATHS_ALLOWED_READ = ** BLANK or char() *DB2_INST.DB2_DXX_PATHS_ALLOWED_WRITE = ** BLANK or char() *DB2_INST.DB2_HADR_BUF_SIZE = 2*LOGBUFSZ ** BLANK or 0 - MAX *DB2_INST.DB2_LOGGING_DETAIL = ** BLANK or char() *DB2_INST.DB2_MAP_XML_AS_CLOB_FOR_DLC = NO ** YES, NO *DB2_INST.DB2_MAX_CLIENT_CONNRETRIES = ** BLANK or char() *DB2_INST.DB2_MAX_INACT_STMTS = ** 0 - 4294967296 *DB2_INST.DB2_MDC_ROLLOUT = IMMEDIATE ** DEFER, IMMEDIATE or OFF *DB2_INST.DB2_MINIMUM_CLIENT_LEVEL = ** BLANK or char() *DB2_INST.DB2_NUM_CKPW_DAEMONS = 3 ** 0 - 100 *DB2_INST.DB2_RESOURCE_POLICY = ** valid path to configuration file *DB2_INST.DB2_SKIPINSERTED = OFF ** ON, OFF *DB2_INST.DB2_SMS_TRUNC_TMPTABLE_THRESH = ** -1, 0-n where n is the number of extents per container that are to be maintained *DB2_INST.DB2_SNAPSHOT_NOAUTH = ** BLANK or char() *DB2_INST.DB2_TAPEMGR_TAPE_EXPIRATION = ** BLANK or char() *DB2_INST.DB2_UPDDBCFG_SINGLE_DBPARTITION = ** YES, 1, TRUE or NO, 0, FALSE *DB2_INST.DB2_USE_DB2JCCT2_JROUTINE = ** ON, YES, 1, TRUE or OFF, NO, 0, FALSE *DB2_INST.DB2_UTIL_MSGPATH = instanceName/tmp directory ** BLANK or char() *DB2_INST.DB2_WORKLOAD = Not set ** BLANK, SAP ** 2nd (non-pureScale) Instance Creation Settings ** ---------------------------------------------- ** Multiple (non-pureScale) DB2 instances can be created in the same ** installation. This section shows how to specify the 2nd instance in the rsp ** file. Note: Only a subset of the instance keywords are listed below. You can ** specify other instance related keywords similar as the 1st instance. All ** keywords in this section are commented out. By default, only one instance ** will be created during the install. ** Prefix name of this instance set. Its value is used by all keywords for the ** same instance. *INSTANCE = DB2_INS2 ** char(8) no spaces *DB2_INS2.NAME = db2inst2 ** char(8) no spaces, no upper case letters ** Use a generated UID if no value provided - highly recommended. *DB2_INS2.UID = ** Unsigned integer *DB2_INS2.GROUP_NAME = db2iadm1 ** char(30) no spaces ** Use a generated GID if no value provided - highly recommended. *DB2_INS2.GID = ** Unsigned integer *DB2_INS2.HOME_DIRECTORY = ** char(64) no spaces. Valid for root install only *DB2_INS2.PASSWORD = Replace with your password ** Valid for root install only ** Administration Server Creation Settings ** --------------------------------------- ** Valid for root installation only. User IDs managed by NIS/NIS+ are not ** supported. If an existing ID is used, make sure it is not locked and its ** password has not expired. *DAS_USERNAME = ** char(8) no spaces, no upper case letters *DAS_UID = ** use db2 generated UID if no values provided(highly recommended) OR a valid unsign int *DAS_GROUP_NAME = ** char(30) no spaces *DAS_GID = ** use db2 generated GID if no values provided(highly recommended) OR a valid unsign int *DAS_HOME_DIRECTORY = ** char(64) no spaces *DAS_PASSWORD = ** char(8) *DAS_SMTP_SERVER = ** char(64) no spaces ** Global Profile Registry Settings ** -------------------------------- *DB2ACCOUNT = ** BLANK or char(199) *DB2ATLD_PORTS = ** BLANK or 1-65535:1-65535 n1<=n2 *DB2BIDI = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2BQTIME = ** BLANK or 1 - MAX *DB2BQTRY = ** BLANK or 0 - MAX *DB2CHGPWD_EEE = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2CHKPTR = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2CLIINIPATH = ** BLANK or char(260) *DB2CODEPAGE = ** BLANK or 0 - MAX *DB2COMM = ** BLANK or TCPIP *DB2COUNTRY = ** BLANK or 1 - 999 *DB2DBDFT = ** BLANK or char(8) *DB2DEFPREP = ** BLANK, ALL, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2ENVLIST = ** BLANK or char() *DB2IQTIME = ** BLANK or 1 - MAX *DB2LDAPCACHE = ** YES or NO *DB2LDAPHOST = ** BLANK or char() *DB2LDAP_BASEDN = ** BLANK or char() *DB2LDAP_CLIENT_PROVIDER = ** BLANK, MICROSOFT or IBM *DB2LIBPATH = ** BLANK or char() *DB2LOADREC = ** BLANK or char(1023) *DB2LOCK_TO_RB = ** BLANK or STATEMENT *DB2NOEXITLIST = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2OLDEVMON = ** BLANK or char() *DB2OPTIONS = ** BLANK or -/+[a,c,e[c,s],n,o,p,s,t,v,w,x] and/or -[f,l,r,z]filename *DB2_OPTSTATS_LOG = ** OFF or ON with parameters {NUM | SIZE | NAME | DIR} *DB2PRIORITIES = ** BLANK or char() *DB2RQTIME = ** BLANK or 1 - MAX *DB2_SET_MAX_CONTAINER_SIZE = ** -1 (no limit) or any integer greater than 64MB *DB2SORT = ** BLANK or char(1023) *DB2SYSTEM = ** char(64) *DB2_SYSTEM_MONITOR_SETTINGS = ** Controls parameters OLD_CPU_USAGE and DISABLE_CPU_USAGE with ON or OFF values *DB2_ENABLE_LDAP = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2_FORCE_NLS_CACHE = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2_NUM_FAILOVER_NODES = ** BLANK or 0 - 999 *DB2_SORT_AFTER_TQ = ** BLANK, 0, 1, YES, NO, ON, OFF, Y, N, TRUE, FALSE, T or F *DB2INSTOWNER = ** BLANK or char(30) *DB2DBMSADDR = ** BLANK or char(10) *DB2_DISABLE_FLUSH_LOG = ** BLANK or ON, OFF *DB2_LIC_STAT_SIZE = ** BLANK or 0 - 32767 *DB2LOCALE = ** BLANK or YES, NO *DB2NODE = ** BLANK or YES NO *DB2_USE_PAGE_CONTAINER_TAG = ** BLANK or ON *DB2TCPCONNMGRS = ** BLANK or 1 - 8 *DB2_PARTITIONEDLOAD_DEFAULT = ** BLANK or YES, NO *DB2_INLIST_TO_NLJN = ** BLANK or YES, NO *DB2_SELECTIVITY = ** BLANK or YES, NO *DB2_REDUCED_OPTIMIZATION = ** BLANK, DISABLE, YES, NO, 0 - MAX *DB2_BINSORT = ** BLANK or YES, NO *DB2BPVARS = ** BLANK or char() *DB2_ENABLE_BUFPD = ** BLANK or ON, OFF *DB2_EVMON_EVENT_LIST_SIZE = 0 ** A value specified in KB, MB or GB but limited by the available memory from the monitor heap *DB2_EXTENDED_OPTIMIZATION = ** BLANK or ON, OFF *DB2FODC = Concatenation of all FODC parameters: CORELIMIT, DUMPCORE, DUMDIR and MEMSCAN; and their values ** CORELIMIT, DUMPCORE, DUMPDIR and MEMSCAN parameters are set different for Unix and Windows *DB2MAXFSCRSEARCH = ** BLANK or -1, 1 - 33554 *DB2MEMDISCLAIM = ** BLANK or YES, NO *DB2_VENDOR_INI = ** BLANK or char() *DB2_XBSA_LIBRARY = ** BLANK or char() *DB2LDAP_SEARCH_SCOPE = ** BLANK LOCAL DOMAIN GLOBAL *DB2MEMMAXFREE = ** BLANK or char() *DB2NTMEMSIZE = ** BLANK or char() *DB2_OVERRIDE_BPF = ** BLANK or 1 - MAX *DB2_DJ_COMM = ** BLANK or char() *DB2ADMINSERVER = ** BLANK or char(64) *DB2_PINNED_BP = NO ** YES or NO *DB2REMOTEPREG = ** BLANK or char(64) *DB2_ANTIJOIN = ** BLANK or YES, NO, EXTEND *DB2_COLLECT_TS_REC_INFO = ** BLANK or YES, NO *DB2PROCESSORS = ** BLANK or 1 - MAX *DB2ASSUMEUPDATE = ** BLANK or ON, OFF *DB2_SKIPDELETED = ** BLANK or ON, OFF *DB2_SQLROUTINE_PREPOPTS = ** BLANK or char() *DB2_INDEX_TYPE2 = ** BLANK or ON, OFF *DB2_APM_PERFORMANCE = ** BLANK or ON, OFF *DB2_FMP_COMM_HEAPSZ = ** BLANK or 1 - MAX *DB2_EVALUNCOMMITTED = ** BLANK or YES, NO *DB2_NO_FORK_CHECK = ** BLANK or ON, OFF *DB2_KEEPTABLELOCK = ** BLANK or ON, OFF *DB2GRAPHICUNICODESERVER = ** BLANK or ON, OFF *DB2_MINIMIZE_LISTPREFETCH = ** BLANK or YES, NO *DB2_TRUSTED_BINDIN = ** BLANK or ON, OFF, CHECK *DB2_CLPPROMPT = ** BLANK or char(99) *DB2_FORCE_APP_ON_MAX_LOG = ** BLANK or TRUE, FALSE *DB2_CLP_EDITOR = ** BLANK or char() *DB2_CLP_HISTSIZE = ** BLANK or 1 - 500 *DB2_LOAD_COPY_NO_OVERRIDE = ** BLANK or LOCAL, DOMAIN, GLOBAL *DB2_MAX_NON_TABLE_LOCKS = ** BLANK or 1 - MAX *DB2_USE_ALTERNATE_PAGE_CLEANING = ** BLANK or ON, OFF *DB2_SCATTERED_IO = ** BLANK or ON, OFF *DB2_NO_MPFA_FOR_NEW_DB = ** BLANK or YES, NO *DB2_OBJECT_TABLE_ENTRIES = ** BLANK or 0 - 50000 *DB2_VIEW_REOPT_VALUES = ** BLANK or YES, NO *DB2_SELUDI_COMM_BUFFER = ** BLANK or ON, OFF *DB2_ENABLE_AUTOCONFIG_DEFAULT = ** BLANK, YES, NO *DB2_OPT_MAX_TEMP_SIZE = ** BLANK or 0 - MAX *DB2RCMD_LEGACY_MODE = ** YES, ON, TRUE, 1 or NO, OFF, FALSE, 0 *DB2_LARGE_PAGE_MEM = ** *, DB *DB2_MAX_LOB_BLOCK_SIZE = 0 ** 0 - 21487483647 *DB2RSHCMD = rsh ** Values are a full path name to rsh, or ssh *DB2AUTH = ** BLANK or char() *DB2CONNECT_DISCONNECT_ON_INTERRUPT = NO ** YES, TRUE, 1 or NO, FALSE, 0 *DB2CONNECT_ENABLE_EURO_CODEPAGE = ** BLANK or char() *DB2FCMCOMM = TCPIP4 ** TCPIP4 or TCPIP6 *DB2FFDC = ** BLANK, ON, CORE:OFF *DB2LOADFLAGS = ** BLANK or char() *DB2RSHTIMEOUT = 30 ** or 1 - 120 *DB2TCP_CLIENT_CONTIMEOUT = 0 ** 0 - 32767 *DB2TCP_CLIENT_RCVTIMEOUT = 0 ** 0 - 32767 *DB2TRC_DEF_BUFFSIZE = ** BLANK or char() *DB2YIELD = ** BLANK or char() *DB2_ASYNC_IO_MAXFILOP = MAXFILOP ** MAXFILOP - MAX *DB2_BAR_AUTONOMIC_DISABLE = ** BLANK or char() *DB2_CONNRETRIES_INTERVAL = ** BLANK or char() *DB2_DXX_PATHS_ALLOWED_READ = ** BLANK or char() *DB2_DXX_PATHS_ALLOWED_WRITE = ** BLANK or char() *DB2_HADR_BUF_SIZE = 2*LOGBUFSZ ** BLANK or 0 - MAX *DB2_LOGGING_DETAIL = ** BLANK or char() *DB2_MAP_XML_AS_CLOB_FOR_DLC = NO ** YES, NO *DB2_MAX_CLIENT_CONNRETRIES = ** BLANK or char() *DB2_MAX_INACT_STMTS = ** 0 - 4294967296 *DB2_MDC_ROLLOUT = IMMEDIATE ** DEFER, IMMEDIATE or OFF *DB2_MINIMUM_CLIENT_LEVEL = ** BLANK or char() *DB2_NUM_CKPW_DAEMONS = 3 ** 0 - 100 *DB2_RESOURCE_POLICY = ** valid path to configuration file *DB2_SKIPINSERTED = OFF ** ON, OFF *DB2_SMS_TRUNC_TMPTABLE_THRESH = ** -1, 0-n where n is the number of extents per container that are to be maintained *DB2_SNAPSHOT_NOAUTH = ** BLANK or char() *DB2_TAPEMGR_TAPE_EXPIRATION = ** BLANK or char() *DB2_DJ_COMM = OFF ** ON or OFF *DB2_UPDDBCFG_SINGLE_DBPARTITION = ** YES, 1, TRUE or NO, 0, FALSE *DB2_USE_DB2JCCT2_JROUTINE = ** ON, YES, 1, TRUE or OFF, NO, 0, FALSE *DB2_UTIL_MSGPATH = instanceName/tmp directory ** BLANK or char() *DB2_WORKLOAD = Not set ** BLANK, SAP ** Database Settings ** ----------------- *DATABASE = ** databas1: char(8) no spaces - this is the prefix for this DB set *databas1.DATABASE_NAME = ** favorateDB: char(8) no spaces - this is the real database *databas1.INSTANCE = ** db2inst1: char(8) no spaces - one value of INSTANCE keyword *databas1.ALIAS = ** alias of databas1: char(8) no spaces and can not start with SYS, DBM or IBM *databas1.LOCATION = ** local, remote, LOCAL or REMOTE; For client only product use remote or REMOTE *databas1.SYSTEM_NAME = ** some remote host char(64) no spaces: for LOCATION=remote only *databas1.AUTHENTICATION = ** CLIENT, SERVER, SERVER_ENCRYPT: optional *databas1.PATH = ** the directory for the database: optional *databas1.SVCENAME = ** service1: for remote LOCATION only *databas1.USERNAME = ** db2user: char(8) no spaces *databas1.PASSWORD = ** db2pwd: char(8) no spaces ** Contact List Settings ** --------------------- ** Valid for root installation only *DAS_CONTACT_LIST = ** LOCAL or REMOTE *DAS_CONTACT_LIST_HOSTNAME = ** hostname for REMOTE CONTACT_LIST *DAS_CONTACT_LIST_USERNAME = ** contactL: char(8) no spaces *DAS_CONTACT_LIST_DOMAIN = ** contactLdomain: char(14) *DAS_CONTACT_LIST_PASSWORD = ** contactLpasswd: char(14) ** Contact Information For Each Instance ** ------------------------------------- ** Valid for root installation only *CONTACT = contact1 ** contact1, char(80) *contact1.NEW_CONTACT = YES ** YES or NO *contact1.CONTACT_NAME = ** userName *contact1.EMAIL = ** sysadmin@yourcompany.com - email address where the notification should be sent *contact1.PAGER = ** YES or NO *contact1.INSTANCE = ** DB2_INST - instance that this contact belongs to, this should be one of the values of keyword INSTANCE. ** Information Center Settings ** --------------------------- ** The default location for accessing the DB2 documentation is the IBM website. ** Only edit this section if you wish to access DB2 documentation from a ** different location, such as your local computer or an intranet server. ** The following DB2_DOCHOST keyword is used to specify where the Information ** Center server is installed. For example, "localhost" for the local computer. *DB2_DOCHOST = ** Any valid hostname ** The following DB2_DOCPORT keyword is used to specify the port number of the ** Information Center server. *DB2_DOCPORT = ** 1024-65535 ** (Valid for root installation only) Tivoli SA MP ** ----------------------------------------------- ** This keyword has been deprecated. The IBM Tivoli System Automation for ** Multiplatforms Base Component (Tivoli SA MP) will be automatically installed ** for you if you specified TYPICAL as the installation type. If an older ** version of the Tivoli SA MP is already installed it will be updated to the ** version on the DB2 installation media, if that update is supported. The ** Tivoli SA MP will only be installed or updated if you have the proper ** license. *INSTALL_TSAMP = NO ** YES or NO. This keyword is deprecated. Valid for root installation only. ** (Valid for root installation only) Pacemaker ** -------------------------------------------- ** The Pacemaker (PCMK) will be automatically installed for you if you ** specified TYPICAL as the installation type. If an older version of the ** Pacemaker is already installed it will be updated to the version on the Db2 ** installation media, if that update is supported. *INSTALL_PCMK = NO ** YES or NO. Valid for root installation only. ** (Valid for root installation only) Global Secure ToolKit ** -------------------------------------------------------- ** The Global Secure ToolKit will be automatically installed for you. If you ** don't want to install it, set the value to NO. *INSTALL_ENCRYPTION = YES ** YES or NO.Valid for root installation only.